Dent Removal equipment
Unispotter
Usage: The unispotter uses a pin or nail designed specifically for this machine that is spot welded the low areas of damage, the nail can then be gripped by the puller and allows the technician the ability to pull the damage out. when the damage is pulled out to the desired shape the nail is twisted off, leaving a clean undamaged surface.
Watch the video
Wiggle Wire / Unispotter Pins / Lenco Triangle Tips
Usage: These tips are used in conjunction with dent removal equipment. Wiggle wire is used with the Dent Maxi, triangle tips are used with the Lenco, and nails are used with the Unispotter.
Lenco Dent Remover
Usage: The Lenco dent remover requires a triangle tip that is welded to the damaged area then pulled with the accompanying slide hammer. Each side of the triangle tip can be used dozens of times before a new tip is needed.
Watch the video.
Dent MAXI
Watch the video.
Bear Claws
Usage: The Dent Maxi is used in the same manner as the Lenco or the Unispotter, and accomplishes the same tasks. The Dent Maxi has a few advantages in that it can apply wiggle wire that a Bear Claw can be hooked when a heavy pull is desired. The tip on the Dent Maxi is non consumable and only requires cleaning once in a while by grinding the end of the tip to the proper shape.
Watch the video.
