Sandpapers
DA Sandpaper
Usage: The top picture show two types of six inch DA paper, the papers with holes is used in conjunction with a vacuum assist DA sander. There are examples of eight inch DA paper, and a comparison of the six and eight inch paper.
DA Sandpaper
Usage: The top picture show two types of six inch DA paper, the papers with holes is used in conjunction with a vacuum assist DA sander. There are examples of eight inch DA paper, and a comparison of the six and eight inch paper.
DA Sandpaper
Usage: The top picture show two types of six inch DA paper, the papers with holes is used in conjunction with a vacuum assist DA sander. There are examples of eight inch DA paper, and a comparison of the six and eight inch paper.
Sandpapers come in many different grits, the lower number of the grit the courser it is. Common uses for varied grits are:
| GRIT | USAGE |
| 36 to 40 | Cutting and shaping of filter materials. |
| 80 to 180 | Final shaping and sanding of filler materials before primer is applied. |
| 220 to 360 | Blocking and leveling of primers. |
| 400 to 800 | Final sanding before applying topcoats. |
| 1000 to 3000 | Cutting and buffing of tipcoats. |
Longboard Sandpaper
Usage: Longboard paper is used on Board sanders, typically to cut and shape filler material.
7 Inch Grinding Disc
Usage: Grinding discs are use for grinding off paint or welds before the dent removal stage and filler application stage. Normal grits are 24 to 50 grit depending on the application.
2 & 3 Inch Roloc Grinding Discs
Usage:Notice the numbering on the back of the roloc disc, This indicates the grit of the disc, all sandpapers and discs have the grit stamped ion the back.
2 & 3 Inch Roloc Grinding Discs
Usage:Notice the numbering on the back of the roloc disc, This indicates the grit of the disc, all sandpapers and discs have the grit stamped ion the back.
2 & 3 Inch Roloc Grinding Discs
Usage:Notice the numbering on the back of the roloc disc, This indicates the grit of the disc, all sandpapers and discs have the grit stamped ion the back.
Cheese Grater File
Usage: This file is use to do the initial cutting of filler materials if the filler was spread uneven and excessively thick.
Assorted Plastic Spreaders
Plastic Filler Mixing Board
Usage: These are the tools used to mix and spread filler materials. NOTE, the mixing board should be made of a none absorbent material. If cardboard is used resins in the filler will be absorbed into the cardboard creating an improper mix of filler.
