Connecting to Wolverine Secure Wi-Fi

Service Description

A more secure encrypted wireless network for students, faculty, and staff. To connect to Wolverine-Secure:

  • Connect to Wolverine-WiFi according to the instructions below.
  • Follow the link below to the SecureW2 site.
  • Check that your OS is shown, then click "JoinNow".
  • Install the application as prompted, then log in using your UVID and password.

How to Access Service

This link will help configure your device for connection to Wolverine-Secure.

Device Configuration Wizard

 

Need Help?

Contact the Service Desk

  Submit a Service Request

Chat With Us

  Start a Chat Session

Live Chat Hours:   Monday-Friday 7:00am - 9:30pm
   Saturday 8:00am - 5:00pm

 

Call Us  (801) 863-8888

Phone Support Hours:    Monday-Friday 7:00am - 10:00pm
   Saturday 8:00am - 5:00pm

 

Instructions to connect to Wolverine Wi-Fi

  1. Connect to Wolverine-WiFi.
    • Click on the Wi-Fi icon in the System Tray.
    • Click on Wolverine-WiFi.
    • Check the box that says Connect automatically.
    • Click on Connect.
  2. Open a browser, and you should be redirected to a UVU authentication page. (If you are not redirected automatically, try navigating to www.uvu.edu in your browser.)
    • Enter your UVID and Password.
    • Download FortiNAC Persistent Agent and run it.
    • After setup is finished, a login window will pop up. Enter your UVID and Password.
  3. After scanning your computer, it will connect you to the Internet.
  1. Click on the Airport, and select Wolverine-WiFi.
  2. Open a browser, and you should be redirected to a UVU authentication page. (If you are not redirected automatically, try navigating to www.uvu.edu in your browser.)
    • Enter UVID and Password.
    • A download for FortiNAC Persistent Agent should start after login.
    • Right click on the FortiNACPersistentAgent.pkg and click on Open.
    • Enter your UVID and Password.
    • The installation for FortiNAC Persistent Agent should start after login.
  3. Log in to the FortiNAC Agent with your UVID and Password, and after scanning your computer, it will connect you to the Internet.
  1. Find your Wireless Connection settings.
    • On Android - Settings > Wi-Fi Settings > Select Wolverine-WiFi *
    • On iOS - Settings > Wi-Fi > Select Wolverine-WiFi *
  2. Open up your web browser, and it will redirect you to the Wireless Registration page.
    • Enter your UVID and Password.
  3. After the registration has completed, restart your web browser, and you should be connected.

* Note: some mobile devices will automatically disconnect the Wi-Fi if it cannot detect the Internet immediately. You may need to reconnect several times or change OS settings to keep the connection through registration.